Numerical evaluation of viscoelastic models for asphalt mixtures under indirect tensile testing
Keywords:
Rheology, constitutive models, numerical modeling, indirect tensile (IDT) testAbstract
The mechanical behavior of asphalt mixtures is significantly complex due to their viscoelastic nature and their dependence on time, temperature, and loading rate, necessitating the use of advanced tools for proper characterization. In this study, the mechanical response of an asphalt mixture is investigated through the numerical modeling of an indirect tensile (IDT) test using the finite element method in ABAQUS. The objective is to propose a computational model for the IDT test of an asphalt mixture by employing the rheological model that best describes its behavior. Constitutive models are implemented and compared, analyzing their influence on key parameters such as displacement and failure load. The modeling process involves defining boundary conditions representative of the laboratory test, applying controlled displacements, and analyzing the evolution of mechanical variables up to material failure. The results reveal differences among the models analyzed; specifically, the 2S2P1D model shows the best agreement with the laboratory test, reproducing the asphalt mixture's behavior with high precision and yielding an error of less than 2% relative to the laboratory test results.
Downloads
Published
How to Cite
Issue
Section
License
The contents of this journal are under a Creative Commons Attribution-NonCommercial 3.0 Unported License, meaning that its copy and distribution are by all means allowed for as long proper acknowledgments are given and commercial use is not involved.







