EVALUACIÓN DEL RENDIMIENTO DEL MORTERO QUE EMPLEA CENIZA VOLANTE COMO SUSTITUTO PARCIAL DEL CEMENTO PÓRTLAND

Authors

  • Johanna Guzmán Castillo Universidad de Puerto Rico
  • Encarnación Reyes Pozo Ciudad Universitaria, Madrid, España
  • Omar I. Molina Bas Departamento de Ingeniería General, Universidad de Puerto Rico

Keywords:

cemento, cenizas volantes, activación alcalina, mortero

Abstract

El cemento Tipo Pórtland es uno del material de construcción más comúnmente utilizado en todo el mundo. No obstante, el proceso de producción tiene un efecto adverso sobre el medioambiente. La industria de la construcción y la academia vienen haciendo esfuerzos para buscar opciones asequibles con el fin de reducir los efectos ambientales de la producción de cemento. Del mismo modo, los costes de la construcción de obra civil impulsan el estudio de alternativas que ayuden a desarrollar materiales más perdurables. En esta investigación proyecto se estudia la posibilidad de obtener un mortero con una dosis reducida de cemento y un buen comportamiento en términos de durabilidad, y con un desempeño mecánico adecuado para su uso en albañilería y terminación de paredes o enlucido. En este trabajo se realizaron distintas mezclas con sustituciones, parciales, elevadas de cemento por cenizas volantes, que fueron activadas alcalinamente utilizando hidróxido de sodio con el fin de mejorar las propiedades obtenidas. Para comprobar su comportamiento se llevaron a cabo ensayos de resistencia a compresión, pruebas de cambio volumétrico y pruebas de absorción capilar. A partir de los resultados se puede concluir que el empleo de cenizas volantes tiende a reducir la absorción al agua de los morteros, baja la expansión máxima registrada, y disminuye la resistencia a compresión, aunque estos cumplieron con los requisitos resistentes mínimos para la mayoría de los morteros base cemento.

References

Mehta, P. K. “Greening of the Concrete Industry for Sustainable Development”. Concrete International, 7, July 2002, Vol. 24, pp. 23-28.

Huntzinger, D. N., Eatmon, T. D. “A life-cycle assessment of Portland Cement Manufacturing: Comparing the Traditional Process with Alternative Technologies”, Journal of Cleaner Production, vol. 17, pp. 668-675, 2009.

AACA, Association, American Coal Ash, Coal Combustion Product (CCP) Production & Use. ACAA. Michigan: s.n. Survey Report, 2011

Somayaji, S. Civil Engineering Materials, Second Edition. Upper Saddle River: Prentice Hall, Inc., 2001.

ASTM Standard C270. Standard Specification for Mortar for Unit Masonry. West Conshohocken, PA: ASTM International, www.astm.org, DOI: 10.1520/C0270, 2012

ASTM Standard C618. Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete. West Conshohocken, PA: ASTM International, www.astm.org, DOI: 10.1520/C0618-12A, 2012.

MOLINA BAS, Omar I. “La influencia de las cenizas volantes como sustituto parcial del cemento Pórtland en la durabilidad del hormigón”. Escuela Técnica Superior de Ingenieros de Caminos, Canales y Puertos, Universidad Politécnica de Madrid. Madrid: s.n., 2008. Tesis Doctoral. 978 84 691 5058 0.

Beaudoin, J. J., et al. “Volume stability of hydrated Portland cement phases exposed to aggressive solutions”, L'ind Ital d Cem, vol. 782, pp. 954-966, 2002.

Mehta. B. “High-Performance, High-Volume Fly Ash Concrete for Sustainable Development”, International Workshop on Sustainable Development and Concrete Technology, 2004.

Bumrongjaroen, W., Livingston, A.L. “A Figure of Merit for Fly Ash Replacement of Portland Cement”,. World of Coal Ash Conference, Kentucky, USA, 2009.

Shi, C.J. “Early microstructure development of activated lime-fly ash pastes”, Cement and Concrete Research, vol. 26, pp. 1351-1359, 1996.

SHI, C.J. “Pozzolanic reaction and microstructure of chemical activated lime-fly ash pastes”, ACI Materials Journal, vol. 95, pp. 537-545, 1998.

Palomo, A., Grutzeck, M.W. And Blanco, M.T. “Alkali-activated fly ashes A cement for the future”, Cement and Concrete Research, vol. 29, pp. 1323-1329, 1999.

ASTM Standard C109/109M. Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens). West Conshohocken, PA: ASTM International, www.astm.org, DOI: 10.1520/C0109_C0109M, 2012.

ASTM Standard C1038/C1038M. Standard Test Method for Expansion of Hydraulic Cement Mortar Bars. West Conshohocken, PA: ASTM International, www.astm.org, DOI: 10.1520/C1038_C1038M-10, 2010.

ASTM Standard C490/490M. Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete. West Conshohocken, PA: ASTM International, www.astm.org, DOI: 10.1520/C0490_C0490M, 2011.

ASTM Standard C1585. Standard Test Method for Measurement of Rate of Absorption of Water by Hydraulic Cement Concretes. West Conshohocken, PA: ASTM International, www.astm.org, DOI: 10.1520/C0033_C0033M-13, 2013.

ASTM Standard C595C/C595M. Standard Specification for Blended Hydraulic Cements. West Conshohocken, PA: ASTM International, www.astm.org. www.astm.org, DOI: 10.1520/C0595_C0595M-13, 2013.

Published

2021-02-02

How to Cite

Guzmán Castillo, J., Reyes Pozo, E., & Molina Bas, O. I. (2021). EVALUACIÓN DEL RENDIMIENTO DEL MORTERO QUE EMPLEA CENIZA VOLANTE COMO SUSTITUTO PARCIAL DEL CEMENTO PÓRTLAND. Journal of Science and Construction, 1(2), 43–51. Retrieved from https://rcc.cujae.edu.cu/index.php/rcc/article/view/22